Automobile clutch plate is a part of our clutch, it is also a product produced by our factory. Do you know what its structure looks like? How does it work? What do you know about these? Follow us to find out.

The clutch pedal has been stepped to the end, but gear shifting is difficult, and the transmission gear has a knocking sound. If it is too thick, add a gasket between the clutch cover and the flywheel. Check whether the free travel of the clutch pedal is too large and adjust it. Check whether the height of the separation lever is consistent or too low. For the new friction plate clutch, check whether the driven disc and friction plate are too thick. If the height of the separation lever is the same and the separation is still incomplete, check the height of the lever. Adjust the separation levers to the same height. If they can be separated completely, it means that the original adjustment is improper or too worn. After the release lever is adjusted, the free travel of the clutch pedal must be readjusted. If the above adjustment is normal and the separation is still incomplete, remove the clutch, check whether the driven disk is installed backward, whether the axial movement is difficult, whether the main and driven disks are warped, whether the separation lever screw is loose, and whether the floating pin is off .

The above is the relevant knowledge of the automobile clutch plate that we introduced to you, after you have a certain understanding. If there is a problem with the clutch, you can check it in the areas described above. Then make a correct judgment and then replace it to ensure the normal operation of our car. Contact:    Tel: 86-576-87277009    Fax: 86-576-87277006    Mobile: 86-18057683359

Jiangsu Huayu Automobile Industry Co., Ltd. (automobile clutch manufacturer) was established in 2003 and covers an area of 106,600 square meters. It is a professional manufacturer of clutch systems, covering the supporting and after-sales markets. Our own brands: LOOK, ABOBA, PANDA.